PERSEPOLIS
Friday 19 September 2008, 18:41
من چندتا گوشی چینی dorado d566 دارم که توی شبکه نیستند
پین فایندر پین اوتشون رو پیدا می کنه ولی برنامه china marcle ورژن 60 هیچ عملیاتی اعم از فرمت چنج فلش و... انجام نمی ده
این هم لاگ پین اوت فایندر
software version: 1.14
cable type: 1x12 (L12C)
platform: MSM: Qualcomm CDMA, 3G
searching adapter at COM15...
adapter found, version: 2000
pins: 12, plain
power cycles: 1
activation cycles: 5
power-off delay: 20
start Rx/Tx: 1/1
Loading configuration...
Initializing...
Phone should be Powered-On !
Power-On phone now and press "Ok"
Be sure that phone is not in sleep mode during pinout detection !
Press any phone key from time to time to wake-up phone.
detecting pins...
detected baudrate: 115200
result: Rx:1 Tx:7
time required: 13 sec
Power On !
پین فایندر پین اوتشون رو پیدا می کنه ولی برنامه china marcle ورژن 60 هیچ عملیاتی اعم از فرمت چنج فلش و... انجام نمی ده
این هم لاگ پین اوت فایندر
software version: 1.14
cable type: 1x12 (L12C)
platform: MSM: Qualcomm CDMA, 3G
searching adapter at COM15...
adapter found, version: 2000
pins: 12, plain
power cycles: 1
activation cycles: 5
power-off delay: 20
start Rx/Tx: 1/1
Loading configuration...
Initializing...
Phone should be Powered-On !
Power-On phone now and press "Ok"
Be sure that phone is not in sleep mode during pinout detection !
Press any phone key from time to time to wake-up phone.
detecting pins...
detected baudrate: 115200
result: Rx:1 Tx:7
time required: 13 sec
Power On !
