PDA

مشاهده نسخه کامل : كا510ورزن50 بعد از فلشno correct sim card

milad2
Sunday 9 September 2007, 17:10
v0.91380096/UNI دوستان 510 ورزن 50 بعد از فلش با سیم كارت ایرور میده با این لاگ چیكارش كنم
Card serial:00018513
Loaded 51 flash descriptors
Open COM port OK
Abort all operations.
phone pre-boot failed,possible RECOVERY needed.
Elapsed:5 secs.
SERVER SUPPORT ENABLED.
Open COM port OK
Abort all operations.
phone pre-boot failed,possible RECOVERY needed.
Elapsed:10 secs.
SERVER SUPPORT ENABLED.
Open COM port OK
ChipID:8040,EMP protocol:0301
NEW SECURITY MODEL DETECTED
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:50
Speed:921600
OTP LOCKED:1 CID:50 PAF:1 IMEI:35668201972576 CERT:RED
LDR:060712 1520 HAN_DB2012_FLASHLOADER_R1A002_CXC1250695
Flash ID check:897E
Flash props sent ok
CSloader version:
070410 1405 HANCXC1327364_COMPACT_SEMC_CS_LOADER_1_R3B009
Executing CSCA-based unlock.
loader startup: executed
loader GDFS startup: executed
loader unlock: executed
Backup security data...
Erasing locks...

DISCONNECT PHONE, FULLY TURN IT ON AND ATTACH AGAIN.
BE SURE THAT YOU SET PHONE IN "PHONE MODE"
IF ASKED, INSTALL PHONE DRIVERS

SEARCHING FOR PHONE, "STOP" TO ABORT
Can't read IMEI (COM3)
Can't read IMEI (COM3)
Can't read IMEI (COM3)
Can't read IMEI (COM3)
Can't read IMEI (COM3)
Can't read IMEI (COM3)
Can't read IMEI (COM3)
Can't read IMEI (COM3)
Can't read IMEI (COM3)
Can't read IMEI (COM3)
Abort all operations.
Can't find attached phone with IMEI 35668201972576
Fail
Elapsed:104 secs.
SERVER SUPPORT ENABLED.
Open COM port OK
ChipID:8040,EMP protocol:0301
NEW SECURITY MODEL DETECTED
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:50
Speed:921600
OTP LOCKED:1 CID:50 PAF:1 IMEI:35668201972576 CERT:RED
LDR:060712 1520 HAN_DB2012_FLASHLOADER_R1A002_CXC1250695
Flash ID check:897E
Flash props sent ok
CSloader version:
070410 1405 HANCXC1327364_COMPACT_SEMC_CS_LOADER_1_R3B009
Executing CSCA-based unlock.

WARNING !!!
SAVED SECZONE FOUND FOR PHONE "35668201972576"
FIRST STEP SKIPPED TO SAVE YOUR CREDIT
IF YOU REALLY KNOW WHAT YOU DOING,DELETE "*.SECZONE" FILES
IN NEXT DIRECTORY "F:\Documents and Settings\aa\Desktop\v0.91380096\backup\35668201972 576"
TO ENABLE STEP1 OF CSCA UNLOCK

DISCONNECT PHONE, FULLY TURN IT ON AND ATTACH AGAIN.
BE SURE THAT YOU SET PHONE IN "PHONE MODE"
IF ASKED, INSTALL PHONE DRIVERS

SEARCHING FOR PHONE, "STOP" TO ABORT
Can't read IMEI (COM3)
Can't read IMEI (COM3)
Can't read IMEI (COM3)
Can't read IMEI (COM3)
Can't read IMEI (COM3)
Can't read IMEI (COM3)
Can't read IMEI (COM3)
Can't read IMEI (COM3)
Can't read IMEI (COM3)
Can't read IMEI (COM3)
Can't read IMEI (COM3)
Abort all operations.
Can't find attached phone with IMEI 35668201972576
Fail
Elapsed:94 secs.
SERVER SUPPORT ENABLED.
Open COM port OK
ChipID:8040,EMP protocol:0301
NEW SECURITY MODEL DETECTED
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:50
Speed:921600
OTP LOCKED:1 CID:50 PAF:1 IMEI:35668201972576 CERT:RED
LDR:060712 1520 HAN_DB2012_FLASHLOADER_R1A002_CXC1250695
Flash ID check:897E
Flash props sent ok
CSloader version:
070410 1405 HANCXC1327364_COMPACT_SEMC_CS_LOADER_1_R3B009
Executing CSCA-based unlock.

WARNING !!!
SAVED SECZONE FOUND FOR PHONE "35668201972576"
FIRST STEP SKIPPED TO SAVE YOUR CREDIT
IF YOU REALLY KNOW WHAT YOU DOING,DELETE "*.SECZONE" FILES
IN NEXT DIRECTORY "F:\Documents and Settings\aa\Desktop\v0.91380096\backup\35668201972 576"
TO ENABLE STEP1 OF CSCA UNLOCK

DISCONNECT PHONE, FULLY TURN IT ON AND ATTACH AGAIN.
BE SURE THAT YOU SET PHONE IN "PHONE MODE"
IF ASKED, INSTALL PHONE DRIVERS

SEARCHING FOR PHONE, "STOP" TO ABORT
Can't read IMEI (COM3)
Can't read IMEI (COM3)
Can't read IMEI (COM3)
Can't read IMEI (COM3)
Can't read IMEI (COM3)
Can't read IMEI (COM3)
Can't read IMEI (COM3)
Can't read IMEI (COM3)
Can't read IMEI (COM3)
Can't read IMEI (COM3)
Can't read IMEI (COM3)
Can't read IMEI (COM3)
Can't read IMEI (COM3)
Abort all operations.
Can't find attached phone with IMEI 35668201972576
Fail
Elapsed:103 secs.

روی ال سی دی هم ایرورno correct sim card رو میده
کیمیا
Wednesday 12 September 2007, 12:09
در این قسمت دو موضوع قابل اشاره است :
1- گوشیهای سونی اریکسون CIDهای بالای 49 ، در موقع عملیات فلش نیاز به برقراری ارتباط با سرور دارند و وقتی شما لاگ و اکانت نداشته باشی با مشکل مواجه میشود.
2- پیغام No Correct Sim Card با زدن سریال گوشی که قبلا در شبکه ثبت شده باشد رفع میگردد.
این نظر من در این رابطه بود. امیدوارم که کمکت کرده باشه.
milad2
Wednesday 12 September 2007, 15:25
چه جوری سریال بزنم
IMAN.POLICE
Wednesday 12 September 2007, 17:00
چه جوری سریال بزنم
شما باید با لاگ بیزنی



[Only registered and activated users can see links]
alakdolak
Thursday 13 September 2007, 02:52
این موارد را فرشید جان همیشه خوب راهنمایی میكرد ولی فكر كنم مسافرت رفته

دوست عزیز گزینه نهم در قسمت seting باكس se مربوط به تغییر سریال میبلشد
ALLOW TO CHANGE IMEI WHEN UNLOCKING

اگه بخواهی با سرور كانكت بشی گزینه یازدهم را تیك بزن

USE SERVER FOR CSCA UNL OCK/FLASH

دو مورد را اضافه كنم
این مشكل داره كم كم زیاد میشه ولی هنوز راه حل اساسی پیدا نشده
ظاهرا برای كانكت شدن به سرور برای این مورد احتیاج به كریدیت یا لاگ نیست
milad2
Tuesday 18 September 2007, 21:15
v0.91380096/UNIاقا به دادم برسین ما هر كاری میكنیم این گوشی رو نمیتونیم سریال بزنیم اصلا چیكار كنم كه باكس شماره سریال بخواد ما گزینه های 1و3و8و9وسرور رو تیك میزنم ولی همه مرحله فلش طی میشه ولی سریال نمی خواد همینطور no corecct sim card مونده
Card serial:00018513
Loaded 51 flash descriptors
SERVER SUPPORT ENABLED.
Open COM port OK
ChipID:8040,EMP protocol:0301
NEW SECURITY MODEL DETECTED
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:50
Speed:921600
OTP LOCKED:1 CID:50 PAF:1 IMEI:35668201972576 CERT:RED
LDR:060712 1520 HAN_DB2012_FLASHLOADER_R1A002_CXC1250695
Flash ID check:897E
Flash props sent ok
bypassing DB2012 security...
bad username/password.
unlock failed, that is fatal
Elapsed:14 secs.
SERVER SUPPORT ENABLED.
Open COM port OK
ChipID:8040,EMP protocol:0301
NEW SECURITY MODEL DETECTED
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:50
Speed:921600
OTP LOCKED:1 CID:50 PAF:1 IMEI:35668201972576 CERT:RED
LDR:060712 1520 HAN_DB2012_FLASHLOADER_R1A002_CXC1250695
Flash ID check:897E
Flash props sent ok
bypassing DB2012 security...
bad username/password.
unlock failed, that is fatal
Elapsed:16 secs.
Farshid-jan
Wednesday 19 September 2007, 13:39
سلام.
....
....
bypassing DB2012 security...
bad username/password.
unlock failed, that is fatal
Elapsed:16 secs.
دوست عزیز مشكل شما با آنلاك حل میشه.
و برای آنلاك كردن احتیاج به كردیت دارین.
تیك گزینه های 3-8-9-11-12 را بزن و فلش کن.
البته بازم میگم اگر کردین نداشته باشی این کارها بی فایدست.
milad2
Wednesday 19 September 2007, 17:12
كریدیت چه چوری بخرم
Hossein
Saturday 22 September 2007, 14:38
با باكس یونیورسال میتونی قبل از فلش از گزینه Recover certificate برای ریكاوری استفاده كنی بعد فلش رو با انتخاب گزینه use smartcard بزنی كه این كار لاگ مصرف میكنه ولی چند مدتی هست كه این كار به صورت رایگان انجام می گیره یعنی لاگ مصرف نمی شه. امیدوارم بتونی جواب بگیری.